 |
|
|
|
Product Details:
Payment & Shipping Terms:
|
| Materials: | Stainless Steel 304 / 316 Etc. | Slot Size: | 0.1 Mm - 5mm Or Customer's Requirement |
|---|---|---|---|
| Wedge Wire Size: | 1.5 X 2.2mm,1.5 X 2.5mm,2.3 X 3.6mm Etc. | Support Wire Size: | 2.3 X 2.7mm,2.3 X 3.6mm,3.0 X 4.7mm Etc. |
| Application: | Water-treatment , Water Well Drilling ,oil Well Drilling ,mineral Processing, Coal-cleaning Plant | Feature: | Filter Properly , Easy Clean |
| High Light: | wedge wire filter,johnson wedge wire |
||
Stainless steel Johnson wedge wire sieve bend screen for food processing
the Sieve Bend Screen that is curved in profile and operates more effectively than Flat Screen Panels in the same application, that is, for dewatering and solid to liquid separation. The adjacent Profile Wires are position perpendicular to the process flow and thus enable its leading edge to ‘cut’ the flow and collect the process liquid and smaller solid particles. The much larger particles will run down the screen and are collected as a consequence.
The Sieve Bend Screen is commonly used in food processing and corn wet milling plants. In the corn wet milling process, CP Screens precisely manufactures the 120 Degree DSM Screen which is simple in shape, just like the common Sieve Bend Screen, however its very fine slot openings commonly 75 and 100 µm, are very critical.
The horizontal orientated profile wires enable the screen to effectively thicken pulp or separate fibres to a fine degree. The process flow is introduced to the DSM screen via high-pressure nozzles, which distributes the flow tangentially over the entire width of the screen. The DSM screen will then proceed to ‘slice’ thin layers of water with the accompanying fine particles, ultimately the filtrate media. This action results from the sharp upper edge on the profile wires. Through our accurate and precise optical measurement system, we can provide you with a Statistical Analysis report that underlines the mean, maximum & minimum, standard deviation and measured slot openings in a single batch.
Here is a common specification of this screen:
| Material | Stainless steel SUS 304 |
| Dimension | 1840 mm width, 1600 mm arc length, radius (R) 60 degree |
| Slot opening | 0.5 mm |
| Wedge bar width | 1.5 mm |
| Opening area appr | 25% |
| Wedge profile v-rod type | SH55D |
| Support rods type | SR250 |
| End bar size | 25 mm |
| Width | 10 mm thick |
| Rib spacing | standard |
DSM screen hot specifications ordered by customers:
2. Specifition:
(1) material:stainless steel 304,316,etc
(2) slot size:0.02-5mm or customer's requirement
(3) support bars pitch:1.5-3cm or customer's requirement
(4) wedge wire size: 1.5x2.2mm,1.5x2.5mm,2.3x3.6mm,1.8x4.3mm,3.0x4.7mm,etc
(5) support bars size: 2.3x2.7mm,2.3x3.6mm,3.0x4.7mm,3.7x5.6mm,3.3x6.3mm,etc
|
DSM screen panel
|
|
|
Material:
|
stainless steel (304,316 etc.)
|
|
Wedge Wire or
Profile Wire (mm):
|
Width : 1.50 1.80 2.30 3.00 3.30 3.70
|
|
Height : 2.20 2.50 2.70 3.60 4.30 4.70 5.60 6.30 7.00
|
|
|
Support Rod or
Support Wire (mm):
|
Width : 2.30 3.00 3.30 3.70
|
|
Height : 2.70 3.60 4.70 5.60 6.30
|
|
|
Round : 2.50mm -- 6.0mm
|
|
| Slot Opening Size (mm) | 0.02mm - 5 mm |
|
Length:
|
lengths up to 6 meters or customized as your request
|
|
Width:
|
25mm - 1200 mm or customized as your request
|
|
Note: Other specifications can be customized according to your requirement
|
|
3. Application :
1.) Widely used in vairous kinds of medium filtering
2.) As the fitting using in the water-treating equipment ( the environment protection; the sea water transforms into the industrial water and life use water desalination treatment; running water treatment; softening treatment;
3.) The petroleum industry: the petroleum product terminal filters and the chemical acid; the alkali liquid filters, the ethyl alcohol;
4.) The organic solution recycling filter
Contect Details :
Anping Yoston Metal Wire Mesh Co.,Ltd.
No.56 Yuhua South Road , Anping Hebei China
Tel / Wechat / Whatsapp: +86 15833839680
Email: yoston@foxmail.com
